|
|
Project:
|
Circle Cutting jig for the Bandsaw
|
| Starting Date: |
October 2012
|
| Completion Date: |
October 2012
|
| Inspiration: |
New Bandsaw needs new Jig!
|
| Size: |
19 1/2" x 36"
|
| Wood Species: |
3/4" Birch plywood
|
| Finish: |
DEFT Polyurethane Clear Semi-Gloss
|
| Materials Source: |
|
|
Lee Valley Switchable Magnet, 150 lb force (09A02.95) |
|
| Additional References: |
|
|
The best feature of this jig is the amount of time it takes to put in place... Only seconds thanks to the Jig Magnet and the tight fitting "skirt".
The Center of the circle can be easily adjusted by sliding the ruler closer to, or further from the blade. The ruler can be locked by using the knob under the table front. Notice that there are two circle center pins, you obviously would only use one at a time!
Comment on this project
|
|
|
